Arlo security system consists of various modes that allow the users to setup their alro for performing specific action in case of certain conditions. For example a mode can initialize your arlo to start recording whenever a motion is detected and send a short video to your email ID as a notification. To know more about modes and rules kindly refer to the complete information given below.

Modes and its rules together act as an instructor to arlo for performing different tasks according to situation. Arlo modes allow users to completely control their Arlo Security Camera Setup in every situation and well as make them respond differentially. On can enable as well as disable modes and make changes to the rules as per requirement without any restriction any time they want. For example in case when you are in the lawn for yoga, you can turn off the motion detector mode to avoid un-necessary email alerts. Users can themselves create mode according to the requirements based on their surroundings. Aside from creating new modes, four arlo modes are available by default.

Four default arlo modes:

1. Armed Mode: All arlo cameras have been enabled to trigger whenever a motion is detected. Irrespective of the model of arlo, all cameras start recording for a minimum of 10 seconds whenever a motion is detected. These recordings are further sent to the registered email ID as push notification each time the arlo camera is triggered.
2. Disarmed Mode: Under this mode cameras will not be enabled to trigger on detecting a sound or motion around it.
3. Schedule Mode: This mode enables you to setup your arlo to get in to specific modes at any particular period of time, every day, every week or every month. For example a mode can be setup to turn off the indoor arlo off at night or even for the weekend days. 
4. Geo-fencing Mode: This mode almost functions like schedule mode because it also works as instructor for changing the modes of arlo camera. The only difference is that this mode is enabled to work according to the locations detected by mobile device with GPS. Whenever you will move around or at certain distance from the specified location the arlo modes will be changed.  For example you can set your arlo to go to armed mode whenever you go out of your premises.

All these modes are quite simple and easy to use. Still if you are unable to use any of these modes then feel free to get instant Arlo Support.

Each arlo mode comprises of various rules that instruct the arlo to perform various actions accordingly. For every mode there can be five set of rules as listed below:

1. Trigger Device: This rule allows the camera to behave as a triggering device to detect sounds and movements around it.
2. Trigger: This rule refers o the detection of sound or motion whenever an activity is detected around your arlo security cameras. It allows the users to adjust the triggering of camera to avoid notifications regarding un-necessary moments and sounds around camera. In case of Arlo Q as well Arlo Q Plus cameras you can create maximum of three zones of activity to define a precise area of monitoring for your camera.
3. Devices: In case of Arlo wire-free security camera and arlo pro wire free camera an arlo can be configured to initiate the recording by another camera whenever a motion or sound is detected around it. For example the camera covering the road coming to your house can be configured to instruct the camera at your door to start recording whenever an activity or sound is detected around the camera for road.
4. Action: This rule is used to define the task to be performed by arlo whenever a sound or motion is detected around it. An arlo can be configured to do nothing, start recording or take a picture of activity happening around it. The recording time of the camera can be adjusted between 10 seconds to 2 minutes as per requirement. Here you can configure the arlo base station to switch ON the siren in accordance with the trigger. This siren can be varied to four time duration levels and three sound levels.
5. Notifications: This rule allows the user to send a push notification of email alert whenever a trigger is detected by arlo. One can specify multiple email address for receiving email alerts.

So, these were few Arlo modes and the rules that govern the functionality of these modes. Hop you find it informational and helpful. Although the information was quite simple and easy still in case you find any understanding gap then visit https Arlo Netgear Com for more precise details.